IDT ZWIR4532, User Manual

Page: 20 / 22

ZWIR4532 Evaluation Kit User Manual
© 2018 Integrated Device Technology, Inc. 20 November 1, 2018
4. Integrated Development Environment (IDE) Setup and Configuration
This document assumes Rowley CrossWorks for ARM is a commercial toolchain available for Windows and Linux. It provides an integrated
development environment (IDE) and a debugger. IDT provides board support packages for ZWIR45xx modules to allow for quick and easy
project setup.
4.1 Download Required Files
1. Download CrossStudio from https://www.rowley.co.uk/arm/index.htm.
2. Download ZWIR4532 Firmware Package.zip from IDT.com and unzip to a directory of your choice.
3. Download ST-Link Drivers from ST.com.
4.2 Installing CrossWorks for ARM and Obtaining an Evaluation License
1. Run the installation. Note that the installation requires administrator privileges.
2. Start the CrossStudio IDE.
3. From the main menu bar, select “Tools”

“License Manager”.
4. Choose “Evaluate Crossworks”.
5. Select “Primary operating system disk” as the item to which to lock your license.
6. Click on the “Send e-mail” button and wait for reception of your activation key by email –note that this may take some time.
7. After reception of the activation, copy the email contents to the clipboard.
8. Go back to CrossStudio and open the License Manager again.
9. Choose “Activate CrossWorks”.
10. Paste the clipboard contents in the “Enter activation key” textbox (usually the clipboard content is already there).
11. Click on “Install License”.
12. Click “Close”.
4.3 Setting Up Required Libraries and the ZWIR4532 Board Support Package
1. From the main menu bar, select “Tools”

“Package Manager”.
2. Find the “STM32 CPU Support Package” and mark for installation by double-clicking or right-clicking and “Install Selected Package”.
3. Click “Next” button twice followed by “Finish”.
4. From the main menu bar, select “Tools”

“Packages”

“Manually Install Packages…”.
5. Navigate to the directory where the ZWIR4532 Firmware Package has been unzipped.
6. Select the “ZWIR4532 Board Support Package” and click open.