USER GUIDE
REVISION 12/03/15
1
©2015 Integrated Device Technology, Inc.
VersaClock
®
6 - 5P49V69xx Family Programmer
Board
Introduction
The VersaClock6 - 5P49V69xx family programmer board is made to ease the programming of blank 5P49V69xx parts. With the
on-board USB interface, IDT Timing Commander™
GUI can be used to communicate with the VersaClock5 family of devices in
the socket for configuration and programming. The family of VersaClock 6 devices includes the following part numbers:
5P49V6901, 5P49V6913, 5P49V6914.
Board Overview
As shown the in the following diagram, all necessary components and connections are available to test the functionality of the
configuration after the device is programmed. By installing R14 on the back of the board with a 100K
resistor, the device will
be powering up in hardware select mode, in which SEL1 and SEL0 pins can be used to switch among 4 configurations that the
device supports.
Figure 1. Programmer Board Overview (socket closed)
Placing a Blank Chip in the Socket
When socket is open, identify the position of Pin 1 as shown in
Figure 2
. Align the dot of the blank device with the round dent
engraved on the corner of the socket as pointed. After placing the blank device, secure the socket cover.
