10
REVISION A 09/15/14
82P33714/33814 EVALUATION BOARD
Figure 11. APLL1 Parameters for VCO = 614.4MHz
◦
To configure APLL2, select “(custom on DPLL1)” as shown in
Figure 10
. Then click on “Customize” button and ignore
the initial Timing Commander error. Enter the values as shown in
Figure 12
below.
Figure 12. Configure APLL2 Parameters for VCO = 600.0MHz
◦
Once APLL1 and APLL2 have been configured, output frequencies can now be entered at OUT01 ~ OUT04, OUT07.
