IDS GeoRadar IBIS-ArcSAR, User Manual

Page: 66 / 78

Confidential Information - Do Not Distribute
Fig. 148 – Connections to supply IBIS-ArcSAR with AC Mains power
Grounding connection is recommended for the IBIS-ArcSAR operation,
in order to protect the electrical devices of the equipment.
Earth pin is below the generator exhaust gas pipe (
Fig. 149
)
Fig. 149 – Grounding connection
6.5 Generator setup

Open the generator door and fix the panel with the rod placed on the
internal side of the door : the panel has to stay partially open while
the radar is functioning in order to improve ventilation (
Fig. 150
left). If
the panel is left closed a sensor avoids the generator starting (
Fig. 150
)
giving an alarm on both AMF25 Unit and Controller software;
Fig. 150 – Generator panel setup

on the PSU front panel, turned on the GENSET switch placed in the
Control Module. In this way Genset Module will be supplied and the
AMF25® Control Panel will be switched on (
Fig. 151
).
Fig. 151 – Turning on AMF25 Control Panel