OPF-TH2000/OPF-RH2000 User Guide
25
7.2 Product specification
Item
OPF-TH2000 (Transmitter)
OPF-RH2000 (Receiver)
Input
1 input
HDMI (*1)/DVI 1.0
TMDS single link
HDCP 1.4 (Pass-through)
CEC (Pass-through)
Connector: Female HDMI Type A (19-pin) (*2)
1 input
Digital optical signal for extension
RS-232C, LAN
Output
1 output
Digital optical signal for extension
RS-232C, LAN
1 output
HDMI (*1)/DVI 1.0
TMDS single link
HDCP 1.4 (Pass-through)
CEC (Pass-through)
Connector: Female HDMI Type A (19-pin) (*2)
Format
VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) /
WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESA1080 / WUXGA / QWXGA / 4K
(*3)
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*3)
Color depth
24 bit, 30 bit, 36 bit Deep Color (*4)
Dot clock
25 MHz to 297 MHz
TMDS clock
25 MHz to 297 MHz
TMDS data rate
0.75 Gbps to 8.91 Gbps
Plug & Play
Pass-through
Digital audio input/output
Multi-channel LPCM up to 8 channels
Sampling frequency : 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Cable
for extension
Cable
Duplex fiber cable
SFP+ optical transceiver (2 LC connectors)
Polishing (*5)
SFP+ optical transceiver for Multimode : PC polishing (recommended)
SFP+ optical transceiver for Singlemode : UPC polishing (recommended), SPC *APC is not supported
Transmission
distances (*6)
Multimode fiber (OM3) : Up to 984 ft. (300 m)
Singlemode fiber (OS1) : Up to 6.21 mi. (10 km)
Control
RS-232C
1 port/male D-sub (9-pin), full duplex, up to 115.2 kbps
LAN
1 port/RJ-45 10Base-T/100Base-TX/1000Base-T (Auto Negotiation), Auto MDI/MDI-X
General
AC adapter
Input : 100 - 240 VAC ±10%, 50 Hz/60 Hz ±3 Hz
Output : DC 5 V 3 A (A dedicated AC adapter is provided)
Power consumption
About 9 Watts
About 9 Watts
Dimensions
4.2 × 1.2 × 4.7" (106 (W) × 29.5 (H) × 120 (D) mm)
(Quarter rack wide, thin type) (Excluding connectors and the like)
Weight
0.9 lbs. (0.4kg)
0.9 lbs. (0.4kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1 HEC and ARC are not supported.
*2 Use 16.4 ft. (5 m) or shorter HDMI cables.
*3 Supported 4K formats : 24 Hz/25 Hz/30 Hz/60 Hz (4:2:0)
*4 Supported 4K format : only 24 bit
*5 It is possible to connect without using the recommended polishing method, but that may cause a change of transmission distance ability due to an increase in return loss.
*6 The maximum transmission distance is measured under the following conditions: Fiber that is polished by a recommended method is used, there is no interconnection, and the
allowable bending radius is not exceeded.
■
SFP+ Specification
Item
Multimode fiber
Singlemode fiber
Wave length
850 nm (VCSEL Laser*)
1310 nm (DFB laser*)
Max. transmission distances
OM3: 984 ft. (300 m)
OS1: 6.21 mi. (10 km)
Receiver sensitivity (OMA) @10.3Gbps
-11.1 dBm or higher
-12.6 dBm or higher
Average Launch Power
-5 dBm to -1 dBm
-8.2 dBm to +0.5 dBm
Max. input power
+0.5 dBm
+0.5 dBm
Connector
LC (Duplex)
*
The lasers in these models meet class1.
