IDK OPF-RH2000, User Manual

Page: 14 / 27

OPF-TH2000/OPF-RH2000 User Guide
14
5.2 Receiver
①
②
③
⑧
④
⑦
⑤
⑨
⑩
⑥
OPTICAL Rx for HDMI
OPF-RH2000
D
C
5V
3
A
FG
O
UT
PUT
H
DM
I
R
S-
23
2C
Rx
CLASS 1 LASER PRODUCT
クラス 1 レーザ製品
O
PT
IC
AL
TX SIGNAL RX POWER
LAN
STATUS
D
IP
-SW
[Fig. 5.2] Receiver drawing
[Table 5.2] Receiver features
# Feature Description
①
LAN connector Connector for LAN signals
②
RS-232C connector Connector for RS-232C signals
③
LED lights POWER : Lights when power is supplied from the AC adapter.
SIGNAL : Lights when video signals are valid.
TX
: Lights when a valid code is sent from the OPF.
RX : Lights when a valid code is received from the fiber optic cable
connected to the transmitter.
④
Frame ground Use for bonding chassis to local ground. M3 screws are used
⑤
Optical input connector
for extension Input connector of digital optical signals for extension.
Connected to the optical output connector of the transmitter using a fiber
optic cable.
⑥
Optical output
connector for
extension Output connector of digital optical signals for extension.
Connected to the optical input connector of the transmitter using a fiber
optic cable.
⑦
HDMI cable fixing hole Hole for the attached cable clamp to secure an HDMI cable.
⑧
HDMI output connector Output connector for HDMI signals
Connect to a sink device such as monitor.
⑨
DIP switch Sets the following items: pre-emphasis and swing of TMDS signals in the
receiver, transmission response time of Hot Plug Detect, and clock speed
of Display. Data Channel signals.
【
See: 6.3.1 Setting DIP switch
】
⑩
AC adapter connector Connector for the supplied AC adapter