ICP-401UHD User Guide
75
9 Product specification
Item
Description
Input
Video
HDMI/DVI
4 inputs
HDMI Deep Color (*1)/DVI 1.0
TMDS single link, HDCP 1.4/2.2
TMDS clock: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps
EDID emulation
Connector: Female HDMI Type A (19-pin)
Format
VGA to 4K (Dot clock: 25 MHz to 600 MHz)
480p / 720p / 1080i / 1080p / 4K (Up to 4K@60 (4:4:4))
Audio
Digital
4 inputs
2-channel LPCM
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
Connector: Female HDMI Type A (19-pin)
Output
Video
HDMI/DVI
1 output
HDMI Deep Color (*1)/DVI 1.0
TMDS single link, HDCP 1.4/2.2
TMDS clock: 74.175 MHz to 296.703 MHz, TMDS data rate: 2.225 Gbps to 17.802 Gbps
Connector: Female HDMI Type A (19-pin)
Format
VESAHD / WUXGA
*VESAHD / WUXGA, only Reduced Blanking is supported.
1080i / 1080p / 4K (3840 x 2160) / 4K (4096 x 2160)
Audio
Digital
1 output
2-channel LPCM
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector: Female HDMI Type A (19-pin)
Maximum
transmission
distances
Digital input
98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60) (*2)
Digital output
98 ft. (30 m) (1080p@60), 39 ft. (12 m) (4K@60) (*2)
Functions
Scan Converter
Video combination, 32 window layout patterns, Motion adaptive interlaced/progressive conversion,
Aspect ratio control, Picture adjustment (brightness, contrast, display position, display size, etc.),
Truly seamless switching (single-window display mode), Seamless switching with one black frame
(multi-window display mode) (*3)
Others
All functions and configuration settings accessible through browser, Preset memory (32 settings),
Last memory, Anti-snow (*4), Connection Reset (*5), Front key function lock
External control
LAN
1 port/RJ-45 10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X
General
Power
100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
Power
consumption
About 54 Watts
Dimensions
16.9 (W) × 1.7 (H) × 11.8 (D)” (430 (W) × 44 (H) × 300 (D) mm)
(EIA 1U high, full rack wide) (Excluding connectors and the like)
Weight
8.6 lbs. (3.9 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
30 bit/pixel (10 bit/component) Deep Color is supported while x.v.Color, 3D, ARC and HEC are not supported.
4K format: 24 bit/pixel (8 bit/component) is supported.
*2
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・
1080p@60 : when IDK’s AWG 24 cable was used and signals of 1080p@60 24 bit/pixel (8 bit/component) was input or output.
・
4K@60
: when IDK’s 18 Gbps supported cable was used and signals of 4K@60 24 bit/pixel (8 bit/component) was input or output
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*3
Seamless switching with a black frame
*4
The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*5
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the ICP’s output. If other devices are connected between the ICP’s output and sink device, this feature may
be invalid.