manualshive.com logo in svg

IDK ICP-401UHD, User Manual, Page: 19 / 79

Share
Download
IDK ICP-401UHD User Manual Download Page 19

ICP-401UHD User Guide 

19 

6.2.1  Cables 

Use the correct HDMI cable or HDMI-DVI conversion cable depending on the system configuration. 

 

For 4K format video, the maximum TMDS data rate (transmission speed) is 18 Gbps. If a high-speed HDMI 

cable that supports up to 10.2 Gbps rate is used, video cannot be displayed stably. Select an appropriate 

18 Gbps high-speed cable depending on the 4K format. 

The maximum distance may change depending on cable type and characteristics of source and sink devices. 

 

[Table 6.1] 18 Gbps high-speed cable for 4K format 

 

TMDS data rate (Gbps) 

RGB, YCbCr 4:4:4 

YCbCr 4:2:2 

YCbCr 4:2:0 

4K format 

24 bit 

30 bit 

36 bit 

24 bit 

30 bit 

36 bit 

24 bit 

30 bit 

36 bit 

3840x2160p (24/25/30) 

10.2 

Gbps 

18 

Gbps

 

18 

Gbps

 

10.2 

Gbps

 

10.2 

Gbps

 

10.2 

Gbps

 

N/A

 

N/A

 

N/A

 

4096x2160 (24/25/30) 

10.2 

Gbps 

18 

Gbps

 

18 

Gbps

 

10.2 

Gbps

 

10.2 

Gbps

 

10.2 

Gbps

 

N/A

 

N/A

 

N/A

 

3840x2160p (50/59.94/60) 

18 

Gbps

 

N/A

 

N/A

 

18 

Gbps

 

18 

Gbps

 

18 

Gbps

 

10.2 

Gbps

 

18 

Gbps

 

18 

Gbps

 

4096x2160 (50/59.94/60) 

18 

Gbps 

N/A

 

N/A

 

18 

Gbps

 

18 

Gbps

 

18 

Gbps

 

10.2 

Gbps

 

18 

Gbps

 

18 

Gbps

 

18 Gbps: 18 Gbps high-speed cable; 10.2 Gbps: 10.2 Gbps cable 

 

Note:

  

If a cable is extended and a cable joint (JJ) is used, video may be interrupted or may not be output. 

 

 

 

 

Summary of Contents for ICP-401UHD
















































































Reviews:

No comments