IDK ICP-401UHD User Manual Download Page 64

Page: 64 / 79

ICP-401UHD User Guide

8.10 LAN communication

The ICP can be accessed and controlled through LAN communication.

The ICP does not support automatic acquisition of IP address using DHCP (Dynamic Host Configuration

Protocol). If you use the ICP in a network with DHCP, keep a fixed IP address. If controlling peripheral devices

connected over LAN from the ICP, keep multiple fixed IP addresses.

8.10.1 IP address

Top

→

LAN

→

IP ADDRESS

Setting value 0.0.0.0 to 255.255.255.255 [Default] 192.168.1.199

You can set the IP address.

Press the MENU/SET key to apply setting.

8.10.2 Subnet mask

Top

→

LAN

→

SUBNET MASK

Setting value 0.0.0.0 to 255.255.255.254 [Default] 255.255.255.000

You can set the subnet mask.

Press the MENU/SET key to apply setting.

Summary of Contents for ICP-401UHD
















































































Search results

Summary of Contents for ICP-401UHD

Reviews:

Related manuals for ICP-401UHD

Brands by name

Popular brands

IDK ICP-401UHD, User Manual

Search results

Summary of Contents for ICP-401UHD

Reviews:

Related manuals for ICP-401UHD

Brands by name

Popular brands