FDX-32 User
’s Guide
74
8.11.3 Editing preset memory [PRESET EDIT]
Using menu
PRESET MEMORY → PRESET EDIT
Set value
The first page
01 to 32: Preset memory number 1 to 32 *
[xxxxxxxxxx]: Preset memory name (up to 10 characters in ASCII code)
The second page
OUT1 to OUT32: Selecting output channel
V: ---, 1 to 32, OFF: Setting input channel of the FDX [Default]
“
---
“ (not controlled)
A: ---, 1 to 32, OFF: Setting input channel of the MAU-3232 (optional) [Default]
“
---
“ (not controlled)
* If output slot boards are not mounted, output channel information will not be displayed. Also if input slot
boards are not mounted, you cannot set those channels.
When preset memory is loaded, output whose setting is
“
---
“ (not controlled) is not switched.
All preset memories are set to
“
---
“ (not controlled) by factory default.
Output channel 1 = Input channel 1
Output channel 2 = Input channel 2
Output channel 3 = Input channel 3
Output channel 4 = Input channel 4
…
Output channel 31 = Input channel 31
Output channel 32 = Input channel 32
Current I/O channel status
Output channel 1 = Input channel 3
Output channel 2 = Not control (---)
Output channel 3 = Input channel 1
Output channel 4 = Not control (---)
…
Output channel 31 = Input channel 29
Output channel 32 = Not control
Current settings of preset memory 1
Load
I/O channel status after
loading preset memory
Output channel 1 = Input channel 3
Output channel 2 = Input channel 2
Output channel 3 = Input channel 1
Output channel 4 = Input channel 4
…
Output channel 31 = Input channel 29
Output channel 32 = Input channel 32
Settings is not changed
[Fig. 8.12] Loading edited preset memory
【
NOTE
】
● If you do not press the “SET” key, the setting is not changed.
● Do not turn off the FDX while “Saving” is displayed, otherwise, the setting information may be lost.
