FDX-32 User
’s Guide
22
6 Precautions
Before connecting to external devices, follow the precautions below.
6.1 Installation
When installing the FDX, please observe the following precautions.
● Do not place the FDX on top of another FDX.
● Do not block vent holes. Please secure the space above ambient 30 mm/1.18 inches.
● Do not install the FDX to an enclosed space. When the FDX needs to be installed to EIA rack mount
or an enclosed space, please prepare ventilating equipment to keep the ambient temperature at 40
degrees C/104 degrees F or less. If inadequately vented, the life of parts may be shortened and
operations may be affected.
■
Attaching rack mounting brackets
1. Remove two M5 screws from one side of the unit. Retain the screws for step 2.
2. Attach one bracket to the side of the unit using the screws removed in step 1.
3. Repeat steps 1 and 2 on the other side of the unit.
【
NOTE
】
The standard screw tightening torque is 2.94 N
･
m (about 30 kgf
･
cm).
