Part 2 - Configuration
48
Alarm-Out
Select the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
•
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
•
Title
: Designate a name for the alarm-out.
–
Reverse Relay
: Reverse the alarm-out type
connected to the DVR rear panel (NO
→
NC).
•
Range
: Change the schedule time frame.
•
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
•
Channels
: Configure alarm-out port and beep
settings.
Remote Control
•
Port
: Select
None
,
RS232
or
RS485
and then
click
the Setup button and then select the correct
Baud
Rate
,
Parity
,
Data Bits
and
Stop Bits
for the device
you are connecting to the DVR. You can select the
device from the
Remote Control Product
list. If the
RS232
port and
RS485
port are in use for PTZ control,
networking or text input, the remote keyboard cannot
be configured. In this case, the warning message
window will appear when other devices use the same
port such as PTZ control, networking or text input.
The message says that you cannot use other device
because the ports are overlapped.
