background image

Part 2 - Configuration

42

• 

Actions

: Specify which actions to take when video 

blind events occur.

 

Record

: Specify which cameras to begin linked 

recording on when an event occurs. If the schedule 
is set to 

Event

 or 

Time & Event

 mode, the selected 

cameras will begin linked recording when an event 
occurs.

 

Alarm-Out

: Designate event-triggered alarm-out 

channels and beeps.

 

Notify

: Configure to be notified of events by 

Mail, LAN1 through 5, SNS, FTP, Push, and/or Alert 
Window.

 

PTZ

: Moves the PTZ camera to a specific preset 

position when an event occurs.

In order to use the Callback feature, the DVR must be 
registered on the remote program.

• 

Use Ignoring Time

: Select 

Time Setup

 to specify 

the video blind detection ignore time. Video blind 
detection will be disabled during the specified time 
frame.

Text-In

• 

Setup

: Configure text-in devices.

 

It's possible to batch configure all text-in devices 
with the exception for port settings.  

 

An influx of large amounts of text-in data 
from multiple channels can hinder system 
performance.

• 

Text-In Product

: The setup window is updated so 

that the portion below the port setting matches the 
corresponding text-in device. Displayed screenshot 
illustrates Generic Text settings.

Summary of Contents for TR-2104

















































































Reviews: