Part 2 - Configuration
62
Disk Partially
Full
Generates an event when a disk
in one of multiple quota groups
reaches the specified capacity.
Disk Bad
Generates an event when the
specified percentage of the disk
becomes damaged. Set to between
10% and 90% in 10% intervals.
Disk
Temperature
Specify the threshold temperature.
Once any disk reaches this threshold,
the system will issue an alert.
Disk
S.M.A.R.T.
Monitors disks that support
S.M.A.R.T. and notifies the user if a
disk error is detected.
Fan Error
Notifies the user when the fan inside
the system malfunctions.
eSATA
Disconnected
Notifies the user if an eSATA device
becomes disconnected while in use.
Disk Config
Change
It will be highlighted when the NVR
reboots after the hard disk drive has
been replaced.
No Storage
Found
It will be highlighted when no hard
disk drive has been connected.
Consecutive
Invalid PW
It will be highlighted when login
fails by entering a wrong password
for consecutive attempts.
RAID BROKEN
It will be highlighted when the
mirroring configuration is broken.
(DR-2504P-A model only)
Degrade
It will be highlighted when one of
the HDDs composing mirroring is in
error. (DR-2504P-A model only)
•
For system events, only an e-mail notification of
actions can be selected.
•
In order to use the Notify(Callback) feature, the
NVR must be registered to the remote program on
the receiving PC's end.
•
For more information on RAID Broken and
Degrade, refer to the
.
Camera System
A list of events that occur in the camera except for video
analysis.
Camera System_Audio Detection
●
Activation Time
: Specify how long audio detection
has to last in order for it to be considered as an event.
When the audio detection is not detected for the
specified duration of time, it will not be considered as
an event.
●
No.
: Select which cameras to apply Audio Detection
to.
●
Sensitivity
: Set to between 1 (Low) and 5 (High).
●
Activation Time
: Specify how long audio detection
has to last in order for it to be considered an event.
Audio detection that do not last for the specified
duration of time will not be considered as events.
