Part 1 – Introduction
12
Rear Panel Connections
Monitor Connection
Connect to the
VGA OUT
or
HDMI
port.
Audio Connection
Connect the speakers with a built-in amplifier to the
AUDIO OUT
port. Use the
AUDIO OUT
port to listen to
audio from network cameras.
• This NVR does not feature a built-in audio amplifier
unit and therefore requires the user to purchase a
speaker system with a built-in amplifier separately.
• Check your local laws and regulations on making
audio recordings.
Video Connection
•
Video In/PoE Port
Connect network cameras or video encoders to the
NVR using RJ-45 cable (Cat5, Cat5e, or Cat6). The NVR
recognizes DirectIP™ network cameras automatically.
• For the external hub, we recommend using an Ext.
port to enable functions such as camera alignment.
• Green LED on the right will turn on when PoE comes
on line. Orange LED on the left will then flash once a
link has been established.
• If more than 16 cameras from video encoders are
registered on the NVR, video may not be displayed
smoothly in a remote program.
•
Video In/Ext. Port
This port does not support PoE. It's possible to establish
a network with network cameras and external hubs
using a Cat6 cable.
• This port only supports in 8/16 channel.
• Green LED on the right will turn on if connected to
a 1000 BASE-T network. Orange LED on the left will
then flash once a link has been established.
• When using a Cat5e cable, the data transfer speed
may decrease depending on how to establish a
network.
