Part 2 - Configuration
75
Device
This screen displays an overview of device events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
Event Types
**Recording Fail of
Main Stream
**Recording Fail of
Sub Stream
** The two events are supported by some products
only.
System
This screen displays an overview of system events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
●
Panic Record
: Displays event status based on current
Panic Record status.
●
Check Recording
: Displays event status based on
System Monitoring
settings. For more information,
refer to the
.
●
Disk Almost Full
/
Disk Full
: If the storage device is
not in
Recycle
status, event status is displayed when
the amount of disk space specified under
System
Monitoring
is reached and when the disk becomes
100% full. For more information, refer to the
●
Disk Config Change
: It will be highlighted when
the NVR reboots after the hard disk drive has been
replaced.
●
No Storage Found:
It will be highlighted when no
recordable storage device has been found.
