18
English
Part 2 - Getting Started
While in the PTZ Tools window, select the
icon to display the
Move to Preset window. Select a preset to move the current
PTZ camera to the selected preset’s position.
Advanced Settings
In PTZ mode, selecting a camera and then right-clicking on the
right loads the Advanced PTZ screen as shown below. This menu
lists Speed, Auto Pan, and other advanced PTZ camera control
options available for the camera. Options that are not available for
the selected PTZ camera remain inactive.
You can use the mouse to control PTZ cameras. Left-click
on the mouse and drag to move the camera in the desired
direction and use the mouse wheel to zoom in/out.
PTZ Camera Pan and Tilt
Zoom In/Out
Focus Near / Far
IRIS Open / Close
One Push
Set / Move to Preset
Advanced PTZ
•
While in one push, the message “Focusing...” will prompt
on the screen.
•
Drag and drop to reposition the PTZ Tools window.
•
Select the
icon to hide the PTZ Tools window.
Event Monitoring
When an event occurs, the NVR automatically displays the
channel linked to the event and shows the
icon on the
system status area on the upper right portion of the screen. To
use the Event Monitoring feature, navigate to Display > Main
Monitor and enable Event Monitoring. Event Monitoring
remains in effect throughout the entire Event Monitoring
Time. After that, the NVR will return to the previous screen
if a new event does not take place. Pressing the Layout or a
Camera button before the end of the Event Monitoring Time
reverts the system to Live mode.
