6
DC-TH
201x Installation Guide
※
The network IP address (subnet) of WAN / V-IN must be set differently. Refer to
3.2 When using
standalone NVR.
※
The streaming resolution has to be changed in NVR side.
Refer to 3. Notes on Use.
1.3.2 Connect with VMS on PC (IDIS Center & ISS Client)
DC-TH201x can be used by connecting with VMS. In this case, there are two ways to connect to
VMS. First is registering NVR which has already registered DC-TH201x. Second is registering the
DC-TH201x directly to VMS.
※
When registering DC-TH201x to VMS, the protocol must be ONVIF Conformance as screenshot below
※
Recording schedule can be set either MotionEvent or TimeLapse.
Summary of Contents for DC-TH Series
Page 2: ......