Part 1 – Introduction
9
Overview
Product color and design may vary depending on the model.
Body
12
3
8
4
5 67
1
Lens
2
IR LED
3
Body
4
Stand
5
Bottom Cover
6
Mounting Bracket
7
Cable
8
Sun Shield Screw Hole
•
Lens
Optical zoom lens is installed.
•
IR LED
A sensor in the bottom middle monitors lighting
levels and activates the IR LED during low-lighting
conditions. The PIR (Passive Infrared) sensor in
the upper middle of IR LEDs detects motions by
detecting infrared radiation changes at night or
under low lighting conditions (
DC-T1234WR only
).
The motion detection by the PIR sensor activates
alarm out according to the settings of Alarm Out
(
Remote Setup
>
Event Action
>
Alarm Out
), and
the white LEDs which are at the left and right middle
of IR LEDs are lit while the alarm out is activated.
•
Body
The cables are connected through the stand.
•
Stand
Allows you to adjust the camera direction and lens’
rotation angle. Twist the setscrews counterclockwise
and move the camera to the desired direction. Once
it is set, twist the setscrews clockwise to lock it.
•
Bottom Cover
Allows you to mount the camera to the wall or ceiling
using the mounting bracket provided with the camera.
•
Mounting Bracket
Allows you to mount the camera to the wall or ceiling.
•
Cable
Refer to the
Cable
.
•
Sun Shield Screw Hole
Allows you to screw the sun shield to the camera.
