Part 1 - Remote Setup
19
Exposure
Configure
Exposure
settings.
•
AE Target Gain
: Specify exposure compensation’s
target gain. Exposure is compensated automatically
based on the specified target gain. Higher the gain,
brighter the images.
•
WDR
: Disables or enables the WDR(Wide Dynamic
Range). When the very dark and very bright areas
exist simultaneously on the screen, WDR allows you to
recognize the both areas.
•
Anti-Flicker
: If the lights in the area where the
camera is located use alternating current, specify
the frequency of the lights to minimize flickering.
Matching the frequencies can reduce flickering.
(NTSC: 60Hz, PAL: 50Hz)
•
Slow Shutter
: Activate
Slow Shutter
. The slow
shutter mode functions only at night. When the slow
sh utter mode is enabled, images are displayed bright
even in the low light conditions.
•
Shutter Speed Control
: Adjust Shutter Speed. This
option is available only when
Anti-Flicker
and
Slow
Shutter
are both set to
Off
.
-
Auto
: The system will assess the lighting conditions
and adjust the shutter speed automatically.
-
Manual
: Use the slider to select the desired
shutter speed. Select the most suitable minimum
and maximum shutter speeds for the lighting
conditions in the area where the camera is located.
With certain features, selecting
Auto
automatically
loads settings suitable for the camera's installation
environment.
