8
It is recommended to use lubricant to move
the LAN cable smoothly.
3
Pull the cable slightly and arrange the rubber as
shown below.
To pass through a thin cable or more than two
cables, it is advised to finish it using silicon to make
sure waterproofed perfectly. (Silicon finishing part
— refer to the bottom image.)
4
Assemble the cable rubber to the bottom cover.
5
Attach the enclosed desiccant in the bottom to
prevent moisture.
6
Use the screws, anchor provided with the camera
to secure the install body on a wall or a ceiling.
Use the provided guide pattern to check the
distance between the screws.
