Idis DC-D4536 Series Quick Manual Download Page 2

2

Quick Guide

Safety Precautions

1.  Read Instructions

All the safety and operating instructions should be read before the 

appliance is operated.

2.  Retain Instructions

The safety and operating instructions should be retained for future 

reference.

3.  Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do 

not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4.  Attachments

Never add any attachments and/or equipment without the 

approval of the manufacturer as such additions may result in the 

risk of fire, electric shock or other personal injury.

5.  Water and/or Moisture

Do not use this equipment near water or in contact with water.

6.  Placing and Accessories

Do not place this equipment on an wall or ceiling 

that is not strong enough to sustain the camera. The 

equipment may fall, causing serious injury to a child 

or adult, and serious damage to the equipment. Wall 

or shelf mounting should follow the manufacturer’s 

instructions, and should use a mounting kit approved by the 

manufacturer.
This equipment and cart combination should be moved with care. 

Quick stops, excessive force, and uneven surfaces may cause the 

equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sufficient 

ventilation is required to prevent an increase in ambient 

temperature which can cause malfunction or the risk of fire.

7.  Power Sources

This equipment should be operated only from the type of power 

source indicated on the marking label. If you are not sure of the 

type of power, please consult your equipment dealer or local 

power company.
You may want to install a UPS (Uninterruptible Power Supply) 

system for safe operation in order to prevent damage caused by 

an unexpected power stoppage. Any questions concerning UPS, 

consult your UPS retailer. 
This equipment should be remain readily operable.

8.  Power Cord

Operator or installer must remove power and TNT connections 

before handling the equipment.

9.  Lightning

For added protection for this equipment during a lightning storm, 

or when it is left unattended and unused for long periods of time, 

unplug it from the wall outlet and disconnect the antenna or 

cable system. This will prevent damage to the equipment due to 

lightning and power-line surges. If thunder or lightning is common 

where the equipment is installed, use a surge protection device. 

10.  Overloading

Do not overload wall outlets and extension cords as this can result 

in the risk of fire or electric shock.

11.  Objects and Liquids

Never push objects of any kind through openings of this 

equipment as they may touch dangerous voltage points or short 

out parts that could result in a fire or electric shock. Never spill 

liquid of any kind on the equipment.

12.  Servicing

Do not attempt to service this equipment yourself. Refer all 

servicing to qualified service personnel.

13.  Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to 

qualified service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following 

the operating instructions, adjust only those controls that 

are covered by the operating instructions as an improper 

adjustment of other controls may result in damage and will 

often require extensive work by a qualified technician to restore 

the equipment to its normal operation.

E.  If the equipment has been dropped, or the cabinet damaged.
F.  When the equipment exhibits a distinct change in performance 

— this indicates a need for service.

14.  Replacement Parts

When replacement parts are required, be sure the service 

technician has used replacement parts specified by the 

manufacturer or that have the same characteristics as the original 

part. Unauthorized substitutions may result in fire, electric shock 

or other hazards.

15.  Safety Check

Upon completion of any service or repairs to this equipment, ask 

the service technician to perform safety checks to determine that 

the equipment is in proper operating condition.

16.  Field Installation

This installation should be made by a qualified service person and 

should conform to all local codes.

17.  Correct Batteries 

Warning: Risk of explosion if battery is replaced by an incorrect 

type. Replace only with the same or equivalent type. Dispose of 

used batteries according to the instructions. The battery shall not 

be exposed to excessive heat such as sunshine, fire or the like.

18.  Tmra

A manufacturer’s maximum recommended ambient temperature 

(Tmra) for the equipment must be specified so that the customer 

and installer may determine a suitable maximum operating 

environment for the equipment.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safeguards

Summary of Contents for DC-D4536 Series













Reviews: