Idis DC-D4536 Series Quick Manual Download Page 3

3

Network Camera

FCC Compliance Statement

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 

OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE 

EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY 

ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE 

TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN 

WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.

WARNING

: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE 

USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN 

INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

WEEE (Waste Electrical & Electronic Equipment)

Correct Disposal of This Product  

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household 

wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled 

waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable 

reuse of material resources. 

Household users should contact either the retailer where they purchased this product, or their local government office, 

for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product 

should not be mixed with other commercial wastes for disposal.

Safety Symbols

Symbol

Publication

Description

IEC60417, No.5031

Direct current

Copyright

© 2021 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this document.

Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.

Registered Trademarks

IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.

The software included in this product contains some Open Sources. You may obtain the corresponding source code which we have 

to distribute according to the license policy. For more information, refer to 

System > General

 page. This product includes software 

developed by the University of California, Berkeley and its contributors, and software developed by the OpenSSL Project for use in the 

OpenSSL Toolkit (http://www.oepnssl.org/). Also, this product includes cryptographic software written by Eric Young (eay@cryptsoft.

com).

The information in this document is believed to be accurate as of the date of publication even though explanation about some 

functions may not be incorporated. The manufacturer is not responsible for any problems resulting from the use thereof. The 

information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to 

incorporate such changes.

Covered by one or more claims of the patents listed at patentlist.accessadvance.com

Summary of Contents for DC-D4536 Series













Reviews: