Part 2 - Configuration
45
Alarm-Out
Select the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
•
Dwell Time
: Select a value between 5 secs and 15 mins
as the alarm-out duration.
•
Title
: Designate a name for the alarm-out.
•
Range
: Change the schedule time frame.
•
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
•
Channels
: Configure alarm-out port and beep
settings.
Remote Control
•
Port
: Select
None
,
RS232
or
RS485
and then
click the
Setup button and then select the correct
Baud Rate
,
Parity
,
Data Bits
and
Stop Bits
for the device you are
connecting to the DVR. You can select the device from
the
Remote Control Product
list. If the
RS232
port
and
RS485
port are in use for PTZ control, networking
or text input, the remote keyboard cannot be
configured. In this case, the warning message window
will appear when other devices use the same port such
as PTZ control, networking or text input. The message
says that you cannot use other device because the
ports are overlapped.
