iDirect iQ LTE Series Page 25 Installation, Support, And Maintenance Manual Download

Page: 25 / 70

Installation, Support, and Maintenance Guide

iQ LTE Satellite Router

3 Interfaces

This chapter describes the iQ LTE Satellite Router physical interfaces and LEDs, and contains
the following sections:

•

Section 3.1,

iQ LTE Satellite Router Front LEDs

on page 11

•

Section 3.2,

iQ LTE Satellite Router Front Panel LED Status Descriptions

on page 12

•

Section 3.3,

iQ LTE Satellite Router Rear Panel Descriptions

on page 15

3.1 iQ LTE Satellite Router Front LEDs

The iQ LTE Satellite Router front panel is shown in

Figure 3-1

and defined in

Table 3-1

Figure 3-1. iQ LTE Satellite Router Front Panel LED Display

NOTE:

The descriptions of the LEDs may vary between software releases. Check

the release-specific

Terminal WUI User Guide and Release Notes

for details.

Summary of Contents for iQ LTE Series







































































Search results

Summary of Contents for iQ LTE Series

Reviews:

Related manuals for iQ LTE Series

Brands by name

Popular brands

iDirect iQ LTE Series, Installation, Support, And Maintenance Manual

Search results

Summary of Contents for iQ LTE Series

Reviews:

Related manuals for iQ LTE Series

Brands by name

Popular brands