iDirect iQ LTE Series, Installation, Support, And Maintenance Manual

Page: 29 / 70

Installation, Support, and Maintenance Guide 15
iQ LTE Satellite Router
iQ LTE Satellite Router Rear Panel Descriptions
3.3 iQ LTE Satellite Router Rear Panel Descriptions
The iQ LTE Satellite Router rear panel is displayed in Figure 3-2 and defined in Table 3-3 on
page 15 .
Figure 3-2. iQ LTE Satellite Router Rear Panel Description
Table 3-3. iQ LTE Satellite Router Rear Panel Descriptions
Callout Label Interface Definition and Connector Type
15 Grounding stud, #6-32tpi
16 no label Power Supply Module LED
OFF - No valid output
Green - Valid DC output
17 no label Fan
18 no label Power supply extraction handle
19 no label Terminal Block Header
Option 1: AC input connector IEC-320-C13
Option 2: DC input terminals - Negative, Positive, and Ground;
14-16 AWG
20 LTE Main SMA connector
21 WiFi Main R-SMA connector
NOTE: This interface only presents on the iQ LTE+ and iQ LTE
PRO models.
22 Traffic Eth Ethernet port - RJ-45, 10/100/1000 port, 802.1q VLAN
23 GPS SMA connector