iDirect iQ LTE Series, Installation, Support, And Maintenance Manual

Page: 30 / 70

16 Installation, Support, and Maintenance Guide
iQ LTE Satellite Router
iQ LTE Satellite Router Rear Panel Descriptions
24 WiFi Aux R-SMA connector
NOTE: This interface only presents on the iQ LTE+ and iQ LTE
PRO models.
25 LTE Aux SMA connector
NOTE: This interface only presents on the iQ LTE+ and iQ LTE
PRO models.
26 Sat Tx Out L-Band Transmit signal to Block Up Converter (BUC) capable of
10 MHz or 50 MHz Reference; 75
Ω , F-Type; +24 V @ 4.0 A (Max)
27 Sat Rx In L-Band Receive signal from Low Noise Block Down Converter
(LNB); 75
Ω , F-Type; 13, 18, 21 VDC @ 500mA (Max)
28 Sat Eth Default port for Sat module management
Ethernet Communications Ports, RJ-45
10/100/1000 Ethernet ports, 802.1q VLAN
NOTE: Initial support is for Sat-Only traffic. Additional traffic
support beyond VLAN management will be available in
Q4, 2019.
29 Console Console Communications Port, RS-232 Serial, RJ-45
Table 3-3. iQ LTE Satellite Router Rear Panel Descriptions (continued)
Callout Label Interface Definition and Connector Type