Operator Manual
Aspect 100US
L100-3060 REV A
19
USER REPLACEMENT ITEMS
These are easily replaced by the operator.
•
Tabletop Pad
Pads are held in place by hook and loop fasteners. Simply pull pad up gently to remove. New
replacement pads are supplied with new self-adhesive fasteners installed and new mating pieces
for the tabletop. Peel off old fasteners from tabletop. Peel off the protective paper and carefully
place new pad into position. Apply pressure to complete installation.
Note: Pads comply to California Technical Bulletin 117 as well as Underwriters Laboratories 94 (UL94)
.
LATEX
Not made with natural rubber latex
•
Tabletop Pad Part Number X100-1687
•
Power Cord Part Number K000-0105
To replace, pull cord straight out from control box.
Power Cord (120V) Contact IDI Customer Service for other voltages
TROUBLE-SHOOTING
SYMPTOM
POSSIBLE CAUSE
ACTION
No motor sound
Power cord not plugged in
Connect power cord
And/or movement
No power at the receptacle
Check appropriate
circuit breaker
A missing or loose connection
Inspect wires and
at the control box
connections
A blown fuse
Change fuse with
same rating
A damaged wire
Repair or replace wire
Emergency stop button activated
Twist & pull up
For other symptoms, consult field service or linak website for actuator (motor)
and controller
.
Website is
For other symptoms, consult field service.
