Operator Manual
Aspect 100US
L100-3060 REV A
9
During an AC failure, the table will automatically run on battery backup without any manual
switching required. It is recommended that power be applied at all times, even when not in use, to
keep a proper charge on the batteries and achieve maximum battery life. (Batteries are being
charged during normal use).
Where the integrity of the external protective earth conductor is in doubt, this equipment shall be
operated from its internal electrical power source by unplugging the power cord from the mains.
Preparation for Patient Use
New Installation:
This equipment will need to be properly cleaned before patient use as it will inevitably come into
contact with contaminants during shipping, unpacking, storage, and installation.
After Installation:
This equipment will need to be properly cleaned between patient use as it will inevitably come
into contact with contaminants during procedures.
SAFETY HAZARDS
Operators using this equipment should understand the safety issues, emergency
procedures, and operating instructions provided.
Comments and questions regarding safety should be addressed to:
Customer Support
Image Diagnostics, Inc.
310 Authority Drive
Fitchburg, MA 01420
USA
Or call
IDI
at (978) 829-0009 or send fax to (978) 829-0027.
Or call toll-free at (877) 304-5434.
Review the SAFETY INSTRUCTIONS before
operating table
