© 2017 IDEXX Laboratories, Inc. All rights reserved. • 06-0006076-01
*Cornerstone, IDEXX-PACS, ImageVue, Patient Clipboard, and VetConnect are trademarks or registered trademarks of IDEXX Laboratories, Inc. or its
affiliates in the United States and/or other countries. All other product and company names and logos are trademarks of their respective holders.
Troubleshooting
Detector status lamps
Ready light (left)
Power light (center)
Error light (right)
ON steady
Ready for exposure
Power on
No communication
ON blinking
Initializing or exposure
is in process
N/A
Error
OFF
Offline
Power off
OK
Maintenance
• Once a month, clean the air filter on the power supply unit:
1. Turn off the equipment, and then push down on the lever at the top of the filter to detach it.
2. Clean the air filter with a vacuum cleaner, and then reattach it to the power supply.
• Once a year, clean the computer fans and wipe down the detector’s exterior with a moistened cloth.
• Replace the battery pack when storage capacity is <60% or operable time is <100 minutes.
For more information
• Refer to the
IDEXX ImageVue* DR50 Operator’s Guide
(in PDF format) provided with your system.
• Call IDEXX Diagnostic Imaging Customer Support at 1-877-433-9948.
Status lamps
メイン
スイッチ
電源状態
表示用
LED
Main switch
Power
status LED
Air filter
Power supply unit
Intended use: The IDEXX ImageVue* DR50 system is intended for veterinary use
only; it is not intended for human diagnostic use. For a detailed list of species and
settings, contact IDEXX Diagnostic Imaging Customer Support:
1-877-433-9948
.
Manufactured for IDEXX Laboratories, Inc.
One IDEXX Drive
Westbrook, ME 04092 USA
1-207-556-3000
idexx.com
