Idexx EquiView, Operator'S Manual

Page: 25 / 36

IDEXX EquiView
®
Digital Radiography System Operator’s Guide 19
Viewing the Patient CD Images
Insert your patient CD into the CD drive. The patient information appears. Follow the viewing
instructions on the patient CD.
NOTE: Because the viewer is running off the CD, it may take a little while to open the image.
NOTE: IDEXX recommends that the viewer for the patient CDs not be installed directly onto any
computers.
NOTE: The default view format is JPEG, but you can view the images as DICOM images by selecting
the check box in front of the series name and clicking the View DICOM images button. To view the
DICOM files, you must have the Microsoft.NET Framework 1.1 software (or later) installed on your
computer. If the software is not already installed, follow the instructions below.
To install the Microsoft.NET Framework software:
1. The patient CD is equipped with the .NET Framework software and will run the installer when
you choose to view DICOM images. Select Authorize this script from the drop-down list.
2. If the .NET Framework software is not installed, you will be asked to install it. Click Yes. The
.NET Framework setup screen appears and begins extracting the necessary files.
. The license agreement appears. Select I agree and click Install. The .NET Framework
software installation begins. A message appears when installation is complete.
Because your EquiView Digital Radiography System is protected with the industry standard in virus
protection software, you may get a “Malicious script detected” warning when you choose to view
DICOM images from the patient CD.