4
DOC No: 8540 REV E
5
DOC No: 8540 REV E
The following are used throughout this guide to indicate procedure that, if not followed
correctly, may result in injury to personnel or damage to equipment.
Warnings are used to alert the reader to a procedure or practice, which if
not followed correctly, could result in personal injury.
Limits of Use
6
Installation in Explosive and Fire Danger Zones
7
Description
7
Function
7
Unpacking and Storage
8
Assembly
8
Space Requirements
8
Location
9
Bulkhead Mounting
9
EMC Compatibility
9
Electrical Connection
10
Lead Assignments
12
Operation
13
Manual Control Adjustment
14
Magnet Decoupling
15
Maintenance
15
Fault Isolation
16
Technical Speci
fi
cation
17-19
Notes
20-22
Table of Contents
CAUTION
NOTE
represents years of
fl
uid handling experience and we feel it is the
fi
nest product available
of its type.
The product you have purchased was designed and constructed for use within designated
limits and conditions. Staying within performance limits and following the guidelines given
in this manual will result in excellent performance and maximum life.
Should you have a question or a problem, technical assistance is available worldwide.
Micropump products are designed for easy
fi
eld servicing with service kits and technical
support available for all products.
The Purpose of this Guide...
is to provide information to enable suitably quali
fi
ed technicians and
fi
tters to install,
operate and maintain the Micropump EagleDrive and common pump/motor combinations.
Use the Guide...
when you have purchased a motor or pump/motor combination. This guide contains
speci
fi
c information for installation, operation, and maintenance of the EagleDrive and
references some of the most common pump/motor combinations. This guide should
be read in conjunction with the instructions provided with your speci
fi
c pump. General
information is given on installation within a system, but reference should always be made
to instructions provided with ancillary equipment when installing the unit.
Abbreviations
The following abbreviations are used in this guide:
°C
Degrees Celsius
°F
Degrees Fahrenheit
EMC
Electromagnetic Compliance
DC
Direct Current
LVD
Low Voltage Directive
IOM Installation, Operation and Maintenance Manual
Max
Maximum
Min
Minimum
RPM
Revolutions Per Minute
SELV
Safety Electric Low Voltage
V
Volt(s)
W
Watt(s)
Warning - Hot Surface is used to alert the reader to a procedure or
practice, which if not followed correctly, could result in personal injury
due to contact with a hot surface.
Cautions are used to alert the reader to a procedure or practice, which
if not followed correctly, could result in damage to the pump, motor, or
ancillary equipment.
Notes are used to highlight important information that may assist the reader in
carrying out a procedure or in understanding the text.
Safety
Your Micropump Product...
