Idex HALE SPV Installation And Maintenance Manual Download Page 18

S

emi-Automatic 

P

riming 

V

alve

14

WARRANTY

LIMITED WARRANTY

EXPRESS WARRANTY.  Hale Products Inc. (“Hale”) hereby warrants to the original buyer that products
manufactured by it are free of defects in material and workmanship for two (2) years or 2000 hours
usage, whichever shall first occur.  The “Warranty Period” commences on the date the original buyer
takes delivery of the product from the manufacturer.

LIMITATIONS.  HALE’S obligation is expressly conditioned on the Product being.

— Subjected to nominal use and service;
— Properly maintained in accordance with HALE’S Instruction Manual as to

recommended services and procedures;

— Not damaged due to abuse, misuse, negligence or accidental causes;
— Not altered, modified, serviced (non-routine) or repaired other than by an Authorized

Service Facility;

— Manufactured per design and specifications submitted by the original Buyer.

THE ABOVE EXPRESS LIMITED WARRANTY IS EXCLUSIVE.  NO OTHER EXPRESS
WARRANTIES ARE MADE.  SPECIFICALLY EXCLUDED ARE ANY IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATIONS, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR USE; QUALITY; COURSE OF DEALING; USAGE
OF TRADE; OR PATENT INFRINGEMENT FOR A PRODUCT MANUFACTURED TO ORIGINAL
BUYER’S DESIGN AND SPECIFICATIONS.

EXCLUSIVE REMEDIES.  If Buyer promptly notifies HALE upon discovery of any such

defect (within the Warranty Period), the following terms shall apply:
— Any notice to HALE must be in writing, identifying the Product (or component)

claimed defective and circumstances surrounding its failure;

— HALE reserves the right to physically inspect the Product and require Buyer to

return same to HALE’S plant or other Authorized Service Facility;

— In such event, Buyer must notify HALE for a Returned Goods Authorization number

and Buyer must return the Product F.O.B. within (30) days thereof;

— If determined defective, HALE shall, at its option, repair or replace the Product, or

refund the purchase price (less allowance for depreciation),

— Absent proper notice 

within 

the Warranty Period, HALE shall have no further liability

or obligation to Buyer therefore.

THE REMEDIES PROVIDED ARE THE SOLE AND EXCLUSIVE REMEDIES AVAILABLE.  IN NO
EVENT SHALL HALE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING,
WITHOUT LIMITATION, LOSS OF LIFE; PERSONAL INJURY; DAMAGE TO REAL OR PERSONAL
PROPERTY DUE TO WATER OR FIRE; TRADE OR OTHER COMMERCIAL LOSSES ARISING,
DIRECTLY OR INDIRECTLY, OUT OF PRODUCT FAILURE.

Summary of Contents for HALE SPV



















Reviews: