Idex Hale Sam, Technical Manual

Page: 136 / 223

116
Table 66. Circuit Breaker Box Wiring (From/To Listing)
Connector 3 Connector 2 Connector 1
Pin CB # Pin CB # Pin CB #
1 11 1 7 1 3
2 10 2 6 2 2
3 9 3 5 3 1
4 12 4 8 4 4
See Table 67 for circuit breaker number 1 connectivity details. Refer to FSG-PL-01507 for all
AB Swing-out
TM
vale and Hale MIV circuits.
Table 67. Circuit Breaker Box Connector 1 Pin 3 Connections
From Connector 1 Pin To
3 AFS MIV–A Module, POWER screw
(All present, quantity varies)
AFS Sensor Module, POWER screw
Audio Amplifier (Utilizes an additional in-line 10A fuse.)
Buzzer Alarm (+) (Harness connector pin 3.)
ITL-40, Pin 1
MatrIIx Pressure Governor Module, Connector A, Pin 1
MIV 2.0 Control (Valve Drive) Module, Pin 1
(All present, quantity varies)
MIV Activation Switch, Pin 1
(All present, quantity varies)
MIV–Rocker Switch, Pin 3
(All present, quantity varies)
SAM Control Center, Connector A, Pin 7 and 17
SAM Control Center, Connector A, Pin 7 and 17
(Auxiliary – Officer Panel)
SAM Control Center, Connector A, Pin 7 and 17
(Auxiliary – Rear Panel/Aerial Panel)
SAM Pump Controller, Connector A, Pin 7 and 17
Twister, Pin 1
Wi-Fi Power Supply, Black Connector, Pin 1
Wi-Fi Antenna/Router CAT 6 Cable Plug (Pin 4 and 5)
Prior to R&R of the circuit breaker box ALWAYS verify apparatus power (including current capabil-
ity), harness connections (see paragraph 4.3.5, page 48), and check for tripped/failed circuit
breakers (see paragraph 4.10.6.2, page 120).