background image

2

3

Introduction

From removing your old thermostat, to installing 

your new iDevices

®

 Thermostat, this easy-to-

follow guide will take you through the process, 

step by step. 

If at any time you require assistance, please 

contact our Customer Experience Team.

 

Call: 888.313.7019

 

Email: [email protected]

 

Visit: iDevicesinc.com/Support

Please visit iDevicesinc.com/Compatibility to 

see if your HVAC system is compatible.

Contents

Introduction ........................................................ 3
In The Box .......................................................... 4
Display ................................................................ 5
Before You Start .................................................. 6
Installation Overview .......................................... 7
Professional Assistance ....................................... 7
Abbreviations ..................................................... 8
Installation Details ............................................ 10
Wiring Chart ..................................................... 11
Connecting To The App 
And Wi-Fi

®

 Network ......................................... 14

Configuring The Thermostat 
For Your HVAC System ..................................... 15
Set In-App Preferences ..................................... 15
Wiring Configurations ...................................... 18
Troubleshooting & Support .............................. 23

Summary of Contents for HVAC













Reviews: