ideus ITDECTBB10, User Manual

Page: 25 / 64

USER GUIDE
EN
25
ITDECTBB10
Base default
Go to “BS RESET” in the menu and press OK. After entering the security PIN code, the base
will be restored to its factory default settings.
7
HS SETTINGS
Browse the menu to “HS SET” using the direction keys. You’ll be able to change the following
settings:
Alarm
Access to the “ALARM” option and select the status (ON/OFF). Press OK to confirm,
Enter the exact time you want the Alarm to be launched. Use the direction keys to set
the desired number and then press OK to confirm.
Select “SNOOZE N” or “SNOOZE Y” if you want to set this alarm mode. If the option
is yes, it will allow the user to pause the alarm ring during the alarm process for 6
minutes, just by pressing any key except for
, that will deactivate it completely
when long pressed.
Ringtone Settings
You can chose between 10 different ringtone melodies and configure the settings of an
internal or external call: tone volume, customized melody...
Access EXT RING / INT RING to configure. Press OK to set the VOLUME or MELODY on the
selected category.
Chose between 5 volume levels.
Select MUTE to activate the mute mode.
Browse the 10 available melodies and select your favourite.
Reminder: “OK” key sets the selection and “Phonebook” key allows you to go back to
the previous stage on the menu.
Tone Setup
Access to TONE SET to set the tone that the handset will emit when:
1- It enters into a low battery status
2- The phone is out of range
3- The user press a key.
Interface language
You can choose between ENGLISH (Inglés), DEUTSCH (Alemán), FRANÇAIS (Francés),
ITALIANO (Italiano), ESPAÑOL (Español), PORTUGUES (Portugués), PYCCKNÑ (Ruso) or
TÜRKÇE (Turco).
HS name
Customize your handset name choosing this option on the menu. Use the R/CLR key to
remove the previous letters and enter the name you want to use through the keyboard. Press
OK to confirm.