ideus ITDECTBB10, User Manual

Page: 24 / 64

EN
USER GUIDE
24
ITDECTBB10
EDITING LOGS: Browse the menu using the direction keys and select “EDIT REC ” to modify any
contact detail stored in the Phonebook
1- Press OK to access. The first Phonebook entry will appear.
2- Use the direction keys to select the contact you would like to edit. Once selected, you’ll
be able to change the values “Name”, “Number” and “Ringtone”.
REMOVE A CONTACT: Select “DEL REC” on the menu to erase the record.
REMOVE ALL: Select “DELL ALL” for a complite removal of every stored contact.
MEMORY STATUS: This option will show you the number of used entries in the Phonebook.
(for example, if the LCD shows 15/150, it will mean that a total amount of 15 contacts have been
stored, of the original 150 available memories)
5 CALL LOG
Access the “CALL LOG” menu by pressing “OK” and browsing thorugh the menu using the
direction keys. You’ll be able to edit, remove and revise the list of registered calls.
The most recent records will be shown in the first place. If the phone hasn’t got any entry yet,
the LCD will show the message “EMPTY”
Call log operations:
You can save a number appearing in the registry list as a Phonebook contact, erase the selected
entry or remove all the entries on each list category (outgoing, incoming or missing). Just press
OK when revising a number and select “ADDTO PB”, “DELETE?” or “DEL,ALL”.
6
BASE SETTINGS
To review and configure the settings for the handset, access to “BS SET” on the menu by
pressing OK and browsing thorugh the options with the direction keys. You can set the following
options:
Delete handset:
If you select this option, “DELE,HS” the registration link between the base and the handset will
be broken, so you temporary won’t be able to perform any usual action with the phone, just until
you register the handset again in the corresponding base.
In order to complete the deleting process, you will be forced to enter the 4 digit security code (or
PIN). The default PIN number is “0000”
Dial mode
In “DIAL MOD” you can select “PULSE” or “TONE”. By default, the value “Tone” is set.
Flash Time
In “FLASH HR” you can select 100/300/600 or 1000 ms.
Modify the PIN number:
Select “MOD. PIN” using the direction keys on the menu. The LCD will be showing “PIN?”. Prior
to customize your own PIN, you must enter the old PIN before (0000 by default). Then enter your
new PIN twice. Once validated, press OK to confirm the changes.