Product specifications, parameters, functions of the device can change without notice!
33
IDENTIVISION IP NVR INSTALLATION GUIDE
8. ALARM
28. picture
Alarm
8.1 Video motion
When the system detects the motion signal that reaches the sensitivity, the motion detection is activated.
[Channel]
which channel settings are activated
[Activation]
function activation
[Sensitivity]
set the sensitivity for the right option
[Area]
Click on Settings, and set the area control (the light blue is the guarde, dark blue is ungarded area)
[Period]
Set a time frame of when to record
[Alarm output]
select the alarm output
[Record channel]
select the channel which would you like to record
[Step]
step selection
[Delay]
When alarm is over, recording will last some seconds (10~300sec), then stop
[Snapshot]
snapshot activation
The snapshot can be linked to enable the motion detection in the corresponding period of the [Record
Setting] in (recording settings).
[PTZ activation]
when alarm is detected, the PTZ option can be activated (for this option please first set
the right PTZ options in he [PTZ control]
[Email]
when alarm happen, link email sending to inform user.
Note:
sending email, need to do related setting at[Net service]
[FTP upload]
when alarm happens, if record or snapshot channel was chosen, the record file and snapshot
image will be uploaded to the appointed position.
Note:
FTP upload, need to do related setting at[Net service]
