Product specifications, parameters, functions of the device can change without notice!
56
IDENTIVISION IP NVR INSTALLATION GUIDE
12.2 First steps
First connect the cameras to the power supply and to the network, after this make sure that the devices
have static IP addresses (at default they have, but its the same, we have change that). This steps are not
necessary, but provide a stable network connection.
These steps are showed by a system with a TP-link router and an NVR recorder. Other manufactures
have the same solutions, but the steps can be different.
First find out what is your router default IP address (it is written on your router, or in the setting
menu)
64. picture
Router settings
Default IP address: 192.168.1.1
Subnet Mask: 255.255.255.0
Router Mac address: F4-EC-38-CC-8A-5A
12.3 Static IP address to the Cameras
12.3.1 Add device to CMS software
To make these steps, the devices have to be in the same IP region as the router ( the default region for the
cameras is 192.168.1. ...). If it is not, please make the next chapter steps first.
Step 1.
Install the CMS software from the CD, on a PC that is on the network as the cameras.
Step 2.
Log-in to the CMS software.
user: super
password:(default none)
65. picture
CMS program
Step 3.
Choose the System, and click on the Device Manager.
