Not-INt-05 Janvier 2021 (Version 1.0)
9
Users should follow the following rules to avoid charging
dangers:
The electric wheelchair does not include the charger, please use
national standard charger that the output voltage is 24V, 3A.
It should be well ventilated when charging. Do not expose the
wheelchair to sunlight and humid environment.
The charging environment temperature range is from 10 to 50°C.
If it is out of the environment temperature range, the battery is
unable to function well, and can easily make battery damaged.
It is normal for the fan making a sound during charging. It is for
cooling the charger, please do not worry about it.
Prevent liquid go into the charger during charging. Moreover, do
not place charger on the flammable items, such as fuel, footrest
or seat cushion.
ThE UsAgE AnD mAInTEnAncE oF bATT
Wrong operation of replacing battery may cause danger of explosion. Only
the same or recommended type of battery is suitable for replacement. In
addition, please make sure the battery poles are correct. Key points for
prolong the battery life: charge frequently, to keep battery power full. It
is better to fully charge the battery if the wheelchair is not being used. If
stop using for a long time, it is better to charge twice per month.
Please stay away from the flames when charging the battery.
The flames may cause battery fire or explosion. Charging makes
hydrogen. Do not smoke while charging
Do not unplug the power supply when the socket or your hands
are wet, it may cause electric shock.
In case of unpredictable accident will happen and hurt the user,
do not use or sit on the electric wheelchair when charging.
system Diagnose
When the indicator LED lights are blinking, it means the wheelchair has
abnormalities. The abnormalities may occur in following parts: motors,
brakes, battery, wire connections, etc.
Through the product’s inner information consultation, the property of
the abnormal condition can be detected by the diagnosis signal. The
abnormal situation can be detected without other service tools.
AUDIo sIgnAL InDIcATIon
Description of
LED light
The meaning of
LED light
Explanation & solution
All LED lights
are unlit with no
sound
The power is off,
wheelchair in
standby or sleep
mode. Power is
poor contacted.
Fuse is tripped or
burned out.
All LED lights
are lit
The power is
turned on, and
self diagnose is
passed, the electric
wheelchair can
work well.
Less LED lights lit, less
battery power remaining.
The leftmost red
LED light is lit
The battery power
is extremely
inadequate.
To charge immediately. Or
battery is malfunction, and
is not able to charge.
Two short
beeps with five
indicator lights
blink twice
The left side motor
is malfunction.
The left side motor is poor
connected or the wire is
disconnected.
Four short
beeps with five
indicator lights
blink four times
The right
side motor is
malfunction.
The right side motor is poor
connected or the wire is
disconnected.
Six short
beeps with five
indicator lights
blink six times
Controller is in
over-current
protection status.
Check the brakes, and
check if the motor drive
mechanism is stuck. Check
the current by ammeter, if
it is not excessive current,
maybe the controller is
malfunction.
Seven short
beeps with five
indicator lights
blink seven times
Joystick is
malfunction
Joystick does not reset, or
the connector is loose.
Eight short
beeps with five
indicator lights
blink eight times
Controller is
malfunction
Please consult your dealer
for maintenance.
Nine short
beeps with five
indicator lights
blink nine times
Controller is
malfunction.
Please consult service
center for maintenance.
controller
conTroLLEr pAnEL
conTroLLEr UsAgE
power switch
Press this button, the battery power gauge
lights will turn on from left to right. Press
again, all the LED lights are off.
In some emergency, you can directly turn off power by press
power button.
sleep mode
If the joystick has no operation more than 20 minutes, the power turn off
automatically, and the system in the sleep mode, system will be woken
up from sleep mode by press power button.
speed adjustment
According to user’s habits and the
circumstances, the wheelchair driving speed
is adjustable.
Adjust speed by press decrease button or increase button.
Speed is divided into five sections, ranged by 20%, 40%, 60%, 80%, and
100% of the max speed.
First gear of speed: 20% of the max speed.
Fifth gear of speed: 100% of the max speed.
horn button
Press the horn button, the horn will sound
until you release the button.