i-Q350 RCM
USER MANUAL
VISIBILITY DELIVERED.
PAGE 17 OF 28
Important Information
1.
Only screws with cylindrical heads are suitable for mounting the tag. We do not advise using counter-
sunk screws. If for some reason this should be necessary, then use only with a suitable counter-sunk
cushioning disc (refer to UN 1277).
2.
The attached bushing is recommended to protect the plastic around the mounting hole from being
damaged when tightening the rivet.
3.
Secure the screws with self-locking nuts, spring washers or Nord-lock washers (refer to UN 7014). Should
mounting be completed with self-tapping screws, loosening may occur over time.
4.
If the tag is mounted outdoors or in a damp environment, all mounting parts need to be made of
stainless steel or other non-rusting material.
5.
A temperature of at least +10 °C (+50 °F) must be maintained during mounting to prevent the casing
from cracking.
6.
Recommended maximum torque
M4/ #8 (with bushing):
2 Nm
M5/#10 (w/o bushing):
3 Nm
M6/#14 (w/o bushing):
3 Nm
If the torque is any greater, the screw may over tighten, or the casing might break.
7.
Metal surfaces in direct proximity to the tag may reduce the tag’s range of function. Tags should not be
mounted in metal recesses or corners.
8.
After mounting, the tag’s function should be tested with appropriate devices and software.