9/11
CETE | Global R&D
November 2017 | V1
SOFTWARE ENVIRONMENTS
Windows 7, 8.1,10 (32 & 64 bit)
Linux Ubuntu 14.04 & 16.04 (32 & 64 bit)
Nominal PC HW configuration is I5 Core with 4 GB RAM
DRIVER INSTALLATION
Before the first use, please follow the guideline hereunder:
•
Launch the driver install
•
Once the driver is installed, plug MorphoTop Slim to the computer directly (No USB hub).
•
Validate the driver activation.
•
You can now launch the MorphoLiveScan SDK (refer to its installation guide for proper usage).
USB REQUIREMENT
It is absolutely mandatory to have a dedicated USB controller for the MorphoTop Slim. It means that no other
USB device should be plugged on the same controller, especially high load devices such as hard disk or
webcam, or another MorphoTOP device
It is highly recommended to plug MorphoTop Slim on a USB3 port. USB2 port could be not enough for full
efficiency of MorphoTop Slim device. You can plug MorphoTop Slim on one USB2 port if it has high power
(0,7 A instead of 500mA for nominal port). Using USB2 port will have lower image frame rate and will limit
the active area for rolled* finger acquisition.
*: Rolled function available on MorphoTop Slim R version only
In order to check if the computer includes enough USB controller, please follow these instructions:
In the Windows device manager, you will be able to check the USB controller list:
Click on the “Start” Button
Choose: “control panel”
Choose “system”
Click on the tab “Device”
Click on “Device Manager”
Check USB controller
