4/11
CETE | Global R&D
November 2017 | V1
SAFETY INSTRUCTIONS
This product is planned for being installed according to the EN/IEC 60950-1 (Ed3) and its amendments. The
power supply is carried out by the standard USB3 link of the PC with a nominal voltage of 5V DC (as shown
on the product label: 5V ).
Europe information
Hereby declares that the MorphoTop Slim has been tested and found compliant with the
following standards as required by the EMC Directive:
2014/30/EU
Directive of the European parliament and of the council of 26
February 2014 on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility
2011/65/EU
Directive of the European Parliament and of the Council of 8 June
2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment
Caution
This product is a Class A device. In a residential environment, this device may cause
interference. In this case, the user is encouraged to try to correct the interference with
appropriated measures.
USA information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Not suitable for hazardous areas.
