9
USING THE HAND VACUUM
1.
Hold the hand vacuum firmly by the handle (4).
2.
Move the on/off switch
I/0
(2) to the
I
position. To turn off the vacuum, move the on/off switch to
0
.
3. Begin
vacuuming.
USE THE CREVICE NOZZLE TO VACUUM CREVICES, CORNERS, ETC.
THE CLEANING BRUSH IS INTENDED FOR VACUUMING UPHOLSTERY, FOR EXAMPLE.
WHILE CHANGING THE ATTACHMENTS, ALWAYS SWITCH THE VACUUM OFF.
CAUTION:
The hand vacuum is a powerful device. Make sure that you are holding it firmly;
otherwise it can slip out of your hand and cause an accident.
CLEANING AND CARE OF THE VACUUM AND DUST FILTER
WARNING:
Always remove the power plug from the power supply before removing or attaching the dust container
(10).
Make sure to protect your eyes from impurities.
1.
To open the dust container, push the unlocking button and pull out the dust container (fig. 1). Take out the dust
filter and put it aside (fig. 2). Empty the garbage from the container and wipe it clean with a dry cloth.
Fig.
1
Fig.
2
2.
Check the suction opening (3) in the dust container for blockage and dirt and remove anything found.
3.
Remove the large particles of dirt from the filer.
WARNING:
Do not use a pressure cleaner to clean the filter.
4.
Clean the dust filter using cold water and let it dry completely before reinsertion.
5.
Reinsert the dust filter into the dust container and attach the container to the vacuum. Always make sure that
the dust container and dust filter are correctly attached and that the locking mechanism is closed.
6.
Clean the vacuum with a slightly damp or dry cloth. Then dry it off thoroughly. Clean the ventilation openings for
the drive unit from time to time as well.
7.
When cleaning the device, do not use hard brushes, abrasive cleaners, alcohol, petrol or solvents.
8.
Do not let any water get inside the device and do not clean it under running water.
DANGER OF ELECTRIC
SHOCK!
CAUTION:
The suction opening (3) must always be open and must not be plugged. Otherwise
the motor will overheat and can become damaged.