8
ASSEMBLY
WARNING:
Always remove the power plug from the power supply before removing or attaching the dust container
(10).
Important note:
During operation, the dust filter (8) must always be inserted. Operating the vacuum without a filter
will destroy the drive unit.
1. To remove the dust container (see also
“Cleaning and Care of the Vacuum and Dust
Filter”), press the unlocking button (1) and
remove the dust container. Prior to attaching
the dust container, make sure that the dust
filter is inserted correctly. Hang the dust
container onto the lower clip, push the
unlocking button, swing the container
upwards and let go of the unlocking button.
(see adjacent diagram)
2. The shoulder strap (5) allows you to hang the
hand vacuum on your shoulder. To do this, open
the hooks on both ends and hang them into the
holes (9) of the device. (see adjacent diagram)
3. To attach the cleaning brush (6) and the
crevice nozzle (7), push them directly into
the suction opening (see adjacent diagram)
or use them in conjunction with the suction
hose. Make sure they are attached firmly.
4. To use the flexible hose (11), push its end into
the suction opening (3) and attach the desired
attachment (6 or 7) to the other end of the hose.
(see adjacent diagram)