iDect Combo User Manual Download Page 58

Page: 58 / 78

ADVANCED SETTINGS

ADVANCED SETTINGS ON YOUR CORDLESS HAN

ON YOUR CORDLESS HAN

ON YOUR CORDLESS HANDSET

DSET

12.1

Cordless

Cordless Handset

Handset

Handset Registration

Registration

IIIIM

MPO

PORRRRTTTTAAAAN

NTTTT:::: When you purchase your phone system, all handsets are

already registered to your base, so you do not need to register them.

Handset registration is only necessary when you buy extra cordless

handsets or if a cordless handset has become faulty.

You can register up to four handsets to one base station, with each

handset’s number (1 to 4) shown on its display.

Note:

Note: Each handset can only be registered to one base.

You need to enter the Master PIN before you can register or unregister

handsets. The default Master PIN is 0000

0000

0000.

12.2

ddition

dditional

al Cordless

Cordless

Cordless H

Handsets

andsets

In standby mode, press and hold the key under the corded base
unit for approximately 5 seconds.

•

on the corded base will flash in Red for up to 1 minute,

and the base will beep, while it is in registration mode.

On the cordless handset, press

Press

to ADVANCED SET

ADVANCED SET

ADVANCED SET and then press

to select.

Press

to REGISTRATION

REGISTRATION

REGISTRATION and then press

to select.

•

If no action is taken on the handset within 10 seconds, the

registration

procedure will be aborted. If this happens, repeat

from step 1.

Enter the Master PIN and then press

to confirm.

Note:

Note: The default Master PIN is 0000

0000

0000.

•

WAITING

flashes on the screen.

•

A confirmation tone is played to

indicate successful registration,

and the handset will return to standby mode, with its handset

number displayed.

•

If no base is found with the entered PIN, error tones are played

to indicate failed registration and the handset returns to

standby mode. You will need to repeat from step 1 above.

All manuals and user guides at all-guides.com

Summary of Contents for Combo















































































Search results

Summary of Contents for Combo

Reviews:

Related manuals for Combo

Brands by name

Popular brands

iDect Combo, User Manual

Search results

Summary of Contents for Combo

Reviews:

Related manuals for Combo

Brands by name

Popular brands