iDect Combo, User Manual

Page: 19 / 78

17
4444 USING THE CORDED BAS
USING THE CORDED BAS USING THE CORDED BAS
USING THE CORDED BASEEEE
4.1
4.1 4.1
4.1 Set Date & Time
Set Date & Time Set Date & Time
Set Date & Time using
using using
using the Corded Base
the Corded Base the Corded Base
the Corded Base
If you subscribe to Caller Display, the time and date settings should be
updated automatically from the network when you receive a call. The
time and date can also be set from a cordless handset.
Using the cordless base, you can set the date in DD/MM
DD/MM DD/MM
DD/MM format and the
time in 24
24 24
24----hours
hours hours
hours format.
1. In standby mode, press and hold
C
to enter date & time
settings.
•
---- ----: : : : ---- ---- ---- ----
D
DD
D
/ / / / ---- ----
M
M M
M
is displayed.
2. Enter the current time, followed by the date. If you make a mistake,
press
M
to delete the last digit entered.
3. Press
C
to confirm the date and time settings.
•
A confirmation tone is played and the corded base returns to
standby mode.
4.2 4.2 4.2 4.2 Make a call Make a call Make a call Make a call from from from from the Corded the Corded the Corded the Corded Base Base Base Base
4.2.1
4.2.1 4.2.1
4.2.1 Pre
Pre Pre
Pre----dialling
dialling dialling
dialling
1. In standby mode, enter the phone number (maximum 24 digits).
2. If you make a mistake, press
M
to delete the last digit entered.
3. Pick up the corded handset from the base unit or press to
S
dial
the number in speakerphone mode.
4. When you complete the call, return the handset to the corded base
unit or press
S
.
4.2.2
4.2.2 4.2.2
4.2.2 Direct dialling
Direct dialling Direct dialling
Direct dialling
1. Pick up the corded handset from the base unit or press
S
.
2. Listen for the dial tone and then enter the phone number.
3. When you complete the call, return the handset to the corded base
unit or press
S
.
All manuals and user guides at all-guides.com