IDEC SmartRelay FL1B-J2B2, Manual

Page: 214 / 297

Configuring IDEC SmartRelay
204
IDEC SmartRelay Manual
5.2 Setting the time-of-day and date
(FL1C-12RC...)
You can set the TOD and the date
•
In parameter assignment mode
• In programming mode.
To set the TOD and the date in parameter assignment mode:
1. Select parameter assignment mode. (see Chapter 5.1.)
2. On the parameter menu, select '
Set Clock '
(Press
▼
or
▲
), and then press OK .
3. Select the day of the week: Press
▲
or
▼
4. Move the cursor to the next position: Press or
5. To change the value: Press
▲
or
▼
6. To set the correct TOD, repeat steps 4 and 5.
7. To set the correct date, repeat steps 4 and 5
8. To confirm your entries:
Press OK
To set the TOD and the date in programming mode:
1. Select programming mode (ESC / >Stop). (see Chap-
ter 3.6.1.)
2. On the main menu, select ' Clock.. '(Press
▼
or
▲
), and
then press OK .
3. Go to the clock menu, and select ' Set Clock '
(Press
▼
or
▲
), and the press OK .
You can now set the weekday and the time as described ear-
lier (as of step 3.).
Set Clock
Mo 15:30
YYYY-MM-DD
2003-01-27
The cursor is positioned on the
weekday.
▲
▲
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com