manualshive.com logo in svg

IDEC MicroSmart pentra FC5A-D12K1E, User Manual, Page: 70 / 164

Share
Download
IDEC MicroSmart pentra FC5A-D12K1E User Manual Download Page 70

5: F

UNCTION

 A

REA

 S

ETTINGS

5-10

W

EB

 S

ERVER

 CPU M

ODULE

 U

SER

’

S

 M

ANUAL

FC9Y-B1278

Connection Settings

This section describes the configurations for client/server connections of the Web server CPU module.

Applications

The Web server CPU module supports Ethernet communication functions with a maximum of 11 server connections and 
a maximum of three client connections. Using those connections, maintenance communication, user communication, 
and Modbus TCP communication can be used. Those communications can be configured in the Function Area Settings 
dialog box.

Description of functions

The Web server CPU module has a maximum of three connections for the maintenance communication server as 
standard. WindLDR on a PC can monitor, download, or upload the user program using the standard maintenance 
communication server.
In addition to the standard maintenance communication server, the Web server CPU module has eight server 
connections that can be used for maintenance communication, user communication, or Modbus TCP communication. 
Even when the maintenance communication is configured for additional server connections, the user program cannot be 
downloaded or uploaded through those server connections. When Modbus TCP is configured, the same port number can 
be configured in multiple server connections so that multiple Modbus TCP clients can access the Web server CPU module 
through the same port.
To limit the access to the Web server CPU module, IP address flittering can be used. By specifying the IP address that can 
access the Web server CPU module, anonymous access can be limited.

Programming WindLDR

1.

Select 

Configuration

 from the WindLDR menu bar, and then click 

Connection Settings

.

The Function Area settings dialog box appears.

2.

Configure maintenance communication server, server connections, or client connections.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for MicroSmart pentra FC5A-D12K1E





































































































































































Reviews:

No comments