4 HG2G-5T, HG1G
1-78
MICRO/I Hardware Manual
●
Adjusting the Touch Panel
A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc. Adjust the touch
panel according to the following procedure when there is a gap in the operation of the touch panel.
1
Press the
Main Menu
on the Top Page in System Mode. The Main Menu Screen appears.
2
Press in order of
Initial Setting
,
Initialize
,
TP Adjust
. The confirmation screen appears and asks “Adjust Touch
Panel setting?”. Press
Yes
, then the Touch Panel Adjust screen appears.
3
Press the center of the X mark, then the position of the mark changes one after another. Press five marks
sequentially.
4
When normally recognized, the confirmation screen of
2
is restored.
At procedure
3
, when pressing a point away from the center of the X mark, a recognition error will result. Then the X
mark returns to the initial position, then repeat the procedure of
3
again.
Run
Offline
Main Menu
<<
>>
SYSTEM MODE TOP PAGE
2010/OCT/14/THU 14:56:44
IP Address 192.168.0.1(DHCP)
BRIGHTNESS 16
BRIGHTNESS 16
Press the center of the symbol.
Press the center of the X mark.
This will ensure the accuracy of the touch panel operation.